Looking for:
onn 2 Channel Soundbar User Guide » ItsManual - Frequently Asked Questions |
Onn sound bar manual
Thankfully, these issues are relatively easy to fix. There are several issues that your Onn soundbar may have, including blinking lights, fading audio, and more. However, most of the time these can be resolved. Using troubleshooting tips and tricks, you can often fix your Onn soundbar.
Keep this in mind before you decide to replace the soundbar. As a rule, you should try disconnecting the soundbar from power first. Wait for several seconds, and then plug it back in. In some cases, this simple step can resolve issues. However, when you need more in-depth Onn soundbar troubleshooting , consult this guide. There is a simple fix for this problem.
Soundbars may cut out for a variety of reasons. If your Onn soundbar is cutting out when your media is quiet, it might be one of the following issues. There are many different reasons that your Onn soundbar might not be working. A lot of them are simple fixes. Try these options first.
There is a relatively simple answer for your Onn soundbar turning off. It has to do with the way that the soundbar works. You can change the setting easily. First off, your Onn soundbar will turn off after a certain amount of time with low input. This means that your media is quiet or the volume on your TV is too low.
Press the digits 2 and 8 simultaneously within 6 seconds — the LED should blink twice. You can now setup your remote again. The procedure must be performed within 6 seconds of applying power to the remote, that is, inserting batteries. After 6 seconds of Power it will not activate.
Your Onn remote is capable of copying functions straight from the original remote control that came with your device. To use the learning feature, please follow the instructions below: Press the device key on the Onn to activate the mode that you wish to learn the functions onto i.
Press and release the corresponding key on the original remote, for example Power. The red LED will blink twice to indicate the key has been learned correctly. Repeat steps 4 and 5 for each key you want to learn — remember you can learn from multiple remotes, but only one function per key.
If the red LED shows one long blink at step 6, the function was not learned correctly, please try again from step 4. If you would like to delete a learned function that you no longer require, please follow the procedure outlined below: Press the Device key for the device your learned function operates.
Please ensure the Onn remote is operating the device in question before setting up the App Shortcut key. When programming, wait for your device to respond first, the remote will remember the timing.
Make sure your device is switched on not on standby. Hold down the App Shortcut key until the light blinks twice and stays lit. Use the Devices key to select the device you want to use for the App Shortcut key macro e. Now perform the sequence of keys exactly as you would normally do.
The remote will operate your device, and the macro is recorded in real time. So if it normally takes a few seconds for your device to react this is normal.
Once you have finished the sequence the streaming service has started on your device. Hold down the App Shortcut key until the light blinks twice and goes out.
The App Shortcut key macro is tied to one device, remember to make sure you picked the right device mode. Frequently Asked Questions User Manual. Thank you for choosing the ONN Remote Control This universal remote control operates a wide range of electronic devices and works across brands and models. Find your setup code in 3 easy steps. Setup by code. Learning feature.
No comments:
Post a Comment